How to Deal With Dampness of Vehicles?

Jun. 15, 2020

The high quality AUDI distributor supplier shares this article for you.

Whenever the climate is humid, our car is also easily troubled by the problem of moisture. How to keep the car dry becomes a worry for many car owners. Today I am here to introduce six tips for keeping cars away from moisture. I hope it will be helpful to the majority of car owners.

1. Most of the environment in the car that is prone to breeding bacteria and odors is closed. Bacteria are more likely to multiply and grow in a humid environment. Some debris in the car, such as rags and biscuit boxes, are easy to mold. Odors appear, contaminating the carriage and affecting the body.

2. The hinges and locks are easy to rust. For a long time, the car is parked in the open air. In addition to the rust and corrosion of the welded parts of the door and the body, the iron parts such as the hinges and locks inside the door are covered by the door trim. Easy to get wet and rust.

3. Chassis rust The car chassis is in contact with water more often and is most likely to rust due to road conditions. In addition, the car chassis does not see sunlight all year round, and moisture will also penetrate through the small holes of the chassis and rust the car body, causing the paint to peel off.



4. The brake system fails because the brake fluid is easily fused with water. Due to the wet weather, the large amount of water vapor accumulated on the brake tank is easy to enter the brake fluid. If moisture enters the brake fluid, during the braking process, The high temperature generated by friction will vaporize the water.

5. The dampness of the speaker and the CD increases the humidity, so it will be difficult to read the disc when placing the CD. The sound of the car is easy to get wet due to rain when driving through the window. If you find that the speaker is damp, you must go to a professional outlet for repair on time.

6. The headlights are easy to enter the water. The brightness of the headlights will be affected after entering the water. If there is a lot of water, the headlights may be damaged, and the direction of the headlights will be changed, which will bring hidden dangers to driving safety.

6 major "moisture prevention techniques"

1. Turn on the dehumidification and dehumidification of the air conditioner. It should be done when it rains. When it rains, the air conditioner cold air should be turned on. This not only removes the mist, but also has the function of dehumidification. Automobile air conditioners can not only adjust the temperature of the cabin but also effectively remove the moisture in the cabin.

2. Use a desiccant or dehumidification box. When the rain stops, you should pay more attention to it. The accumulated moisture should be removed as soon as possible, otherwise, it will be prone to mildew. When not using a car, it is best to buy a simple dehumidification box and put it in the corners, so that the interior parts of the car are not easy to get wet after overnight.

3. Sunbathing, ultraviolet rays under natural sunlight is of course the best and free disinfection method. Therefore, when the weather is fine, you can find a place where it is exposed to the sun, open all the doors and the trunk lid, and let the moisture out of the car to vent and ventilate. The heated body will quickly remove the water vapor accumulated in the car. In addition, the carpets, cushions, and other cotton and linen products in the car can easily absorb moisture and should be washed and dried or replaced regularly.

4. The audio is turned on for an hour or two every day. In normal driving, it is recommended that the audio-visual system works for 1-2 hours so that it can achieve the effect of moisture resistance.

5. Open the sunroof frequently and open the side windowless. Opening the sunroof is conducive to the air circulation in the car to ensure that the owner's upper body has enough oxygen. Opening the side window not only can not circulate the air, but also like to bring in some dust.

6. Chassis sealing and molding, for the chassis, is easy to encounter water and moisture problems, the chassis can be molded.

We are a custom automobile spare parts factory, if you are interested in our products, please feel free to contact us.